NOMA iQ™ CUSTOMER HELP CENTRE

1. On your mobile device go to Settings > Wi-Fi
2. Look for your Wi-Fi network. If you see two or more networks, one of them may be a 2.4GHz band. 2.4GHz network names may end with 2.4 or 2.4G. (For example: "Home Wi-Fi 2.4GHz“). 5GHz network names may end with 5, 5G.
3. If you don't see any network name associated with 2.4 or 5, you need to log in to your Wi-Fi router. Please refer to your router manual/documentation.

1. In the App Store, download the app ‘AirPort Utility’
2. In the AirPort Utility app, click on ‘Settings’
3. Turn on ‘Wi-Fi Scanner’ and all the detected networks will appear in the menu
4. Check the channel:
   • Channel 1 – 13 band means you are on 2.4GHz
   • Channel 13+ band means you are on 5GHz

1. Enter the phone's ‘Settings’ page
2. Tap ‘Network and Internet’
3. Go into your connected Wi-Fi settings by tapping the settings icon
4. Under ‘Frequency’ you can see what channel your phone is currently detecting

1. Make sure your mobile device is running iOS 12.5 or higher / Android 7.1 or higher
2. Verify your network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel
3. Install your smart product and make sure Bluetooth is enabled on your mobile device
4. Login to the NOMA iQ™ app, select the “+” symbol on the top right-hand corner
5. Select your smart product and follow the instructions within the app

1. Make sure your mobile device is running iOS 12.5 or higher / Android 7.1 or higher
2. Verify your network credentials and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel
3. Make sure Bluetooth is enabled on your mobile device
4. Make sure your NOMA iQ™ device is connected to power, turned on, and is in pairing mode

If you’re still having issues, please contact us at info@nomaiq.com

1. Verify your Wi-Fi network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel
2. Install your smart light bulb in a light fixture and turn the light fixture ON
3. If the bulb is flashing, continue to step 4. Otherwise set it to pairing mode by cycling the light ON/OFF about 4-5 times with 1-2 second intervals in between ON and OFF.
4. Make sure Bluetooth and Locations Services is enabled on your mobile device
5. In the NOMA iQ™ app, select the ‘+’ symbol on the top right-hand corner to add the device
6. Select the smart light bulb and follow the prompts in the app

1. Verify your Wi-Fi network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel
2. Plug in your smart light strip and turn it ON
3. If the light strip is flashing, continue to step 4. Otherwise set it to pairing mode by pressing and holding the power button for 3-4 seconds until it starts flashing.
4. Make sure Bluetooth and Locations Services is enabled on your mobile device
5. In the NOMA iQ™ app, select the “+” symbol on the top right-hand corner to add the device
6. Select the smart light strip and follow the prompts in the app

Yes, NOMA iQ™ smart bulbs can be placed in fixtures/lamps that are plugged into smart plugs/switches.

1. In the Home page, select the smart bulb/ light strip you want to restore to factory settings
2. Click on the Settings icon
3. Scroll down and click on 'Delete Device'
4. Select 'Confirm'
5. The device is now removed and in pairing mode

Yes, smart bulbs can be used in ceiling fans.

The NOMA iQ™ bulbs are recommended for indoor use only.

Yes, the NOMA iQ™ bulbs can be used in enclosed fixtures.

Just simply trim the NOMA iQ™ light strip to adjust the length.

1. Install your NOMA iQ™ smart light bulb into the fixture you wish to use it in.
2. Turn on the light on for 1 second and off for 1 second, 5 times.
3. Your light bulb will flash on and off to indicate it’s in pairing mode
4. Open the NOMA iQ™ app on your mobile device and click the plus ‘+’ icon at the top right corner of the home screen to pair the device

1. Connect the power cord to the corresponding port on the controller
2. Connect the light strip to the square connector on the controller
3. Plug the power cord into an electrical outlet
4. Press and hold the button on the controller for 3-4 seconds
5. The light strip will flash on and off to indicate that it’s in pairing mode
6. Open the NOMA iQ™ app on your mobile device and click the plus ‘+’ icon at the top right corner of the home screen to pair the device

 

1. Verify your Wi-Fi network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel
2. Plug in your smart power bar and turn it ON
3. If the indicator light is flashing, please skip to step 4. Otherwise, to put the device into pairing mode, press and hold the power button for plugs (reset button for power bar) for 3-5 seconds until the light starts flashing.
4. Make sure Bluetooth and Location Services is enabled on your mobile device
5. In the NOMA iQ™ app, select the “+” symbol on the top right-hand corner to add the device
6. Select the smart power bar/plug and follow the prompts in the app

1. Unplug the wall plug/outdoor plug for 10 seconds
2. Plug the unit back in and check to see if the power indicator turned on
3. Also try moving the wall plug/ outdoor plug to other outlets to see if the indicator light turns on

NOMA iQ™ wall plugs and smart power bars can be used with lamps/lights, coffee makers, device chargers, fans, and any device or appliance that falls within the power/load rating.

NOMA iQ™ outdoor plugs can be used for devices such as lights, Christmas lights, and other devices that may benefit from being on a schedule. Make sure the device that’s being plugged in adheres to the maximum load rating specifications: 15 A, 125 V AC/ 60 Hz, 1875 W max.

The NOMA iQ™ wall plug and power bar can only be used to turn on/off lights but not dim/brighten lights.

1. Plug your NOMA iQ™ smart wall plug into an electrical outlet
2. Press and hold the power button on the side of the plug for 3-5 seconds
3. The power button will flash on and off to indicate the device is in pairing mode
4. Open the NOMA iQ™ app on your mobile device and click the plus ‘+’ icon at the top right corner of the home screen to pair the device

1. Plug your NOMA iQ™ smart outdoor plug into an electrical outlet
2. Press and hold the power button for 3-5 seconds
3. The indicator light will flash on and off to indicate the device is in pairing mode
4. Open the NOMA iQ™ app on your mobile device and click the plus ‘+’ icon at the top right corner of the home screen to pair the device

1. Plug your NOMA iQ™ smart power bar into an electrical outlet
2. Press the switch to turn on the power bar and the power indicator light will also illuminate
3. Press and hold the reset button for 3-5 seconds
4. The indicator light will flash on and off to indicate the device is in pairing mode
5. Open the NOMA iQ™ app on your mobile device and click the plus ‘+’ icon at the top right corner of the home screen to pair the device

1. Verify your Wi-Fi network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel
2. Plug in your smart air purifier and turn it ON
3. Press and hold the power and Wi-Fi button until you hear 5 consecutive slow beeps to put it into pairing mode
4. Make sure Bluetooth and Location Services is enabled on your mobile device
5. In the NOMA iQ™ app, select the ‘+’ symbol on the top right-hand corner to add the device
6. Select the air purifier and follow the prompts in the app
7. For further troubleshooting, please refer to the manual

1. Plug your NOMA iQ™ smart air purifier into an electrical outlet
2. Press and hold the power and Wi-Fi buttons simultaneously until you hear 5 beeps
3. The Connected icon will flash on and off to indicate the device is in pairing mode
4. Open the NOMA iQ™ app on your mobile device and click the plus ‘+’ icon at the top right corner of the home screen to pair the device

· Verify your Wi-Fi network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel

· Plug in your dehumidifier and turn it on

· Press and hold both the “MODE” and “FAN” button until the display on the control panel shows “P2” indicating that the device is in pairing mode

· Make sure Bluetooth and Location Services is enabled on your mobile device

· In the NOMA iQ™ app, select the ‘+’ symbol on the top right-hand corner to add the device

· Select the dehumidifier and follow the prompts in the app

· For further troubleshooting, please refer to the manual

Yes, the dehumidifier will stop automatically when the bucket is full.

Yes, there’s an adapter at the side of the dehumidifier where you can attach a garden hose for gravity draining. Please refer to the manual for instructions.

In Manual mode, the fan will automatically shut off when the set humidity level is lower than the set humidity. If it’s in Auto Dry mode, the fan will continue to run as long as the humidity is greater than 50%. If it’s in Continuous mode however, it will continue running until the bucket is full.

The app will notify you when the tank is full once you turn on notifications. Please ensure to turn on notifications for the NOMA iQ™ app on your mobile phone, and turn on notifications in the device settings page of the dehumidifier.

Yes, the dehumidifier can be used without the app or Wi-Fi connection. If the device is in pairing mode out of the box, please wait 5 minutes for the device to exit pairing mode so you can use it manually.

No, the dehumidifier does not restart automatically. Please restore power and turn on the device manually.

You can control power, fan speed, mode, humidity level, along with scheduling/Experiences.

The dehumidifier can be set between 30% to 80% humidity.

The screen displays the set humidity briefly when first adjusting the level, and then it will display the room humidity.

· Auto Dry: the dehumidifier will operate in dry mode only. Auto Fan Speed is set automatically. The Desired Humidity is set to 50% automatically.

· Continuous: the dehumidifier will operate continuously. The Fan Speed can be adjusted. The Desired Humidity cannot be adjusted. The LED display will show the room humidity level.

· Manual Set: the dehumidifier will operate at the selected fan speed and desired humidity. If the humidity level of the room is higher than the desired humidity setting, the compressor will turn on. If the humidity level of the room is lower than the desired humidity setting, the compressor will turn off.

P2 indicates that the device is in pairing mode. In order to pair the device and use the smart functions, please follow the instructions in the NOMA iQ™ app. If you’d like to use the device manually without mobile control, please wait 5 minutes for the device to exit pairing mode.

The operating temperatures for the dehumidifier are between 3.3°C and 32.2°C.

Please call customer service for further assistance at 1-844-586-4662.

The dehumidifier can be used during both winter and summer seasons. The operating temperatures for the dehumidifier is between 3.3°C and 32.2°C.

The ideal relative humidity for health and comfort indoors is somewhere between 30-50%.

Exterior:

· Turn off the dehumidifier

· Dust the side grille with a soft brush or the dusting attachment of your vacuum cleaner.

· Note: Have an authorized service technician clean and service the interior coils of your product annually.

Water Bucket:

· Every few weeks, rinse the inside of the water bucket with a mild detergent to avoid growth of mould, mildew and bacteria.

The dehumidifier will stop running and the Empty Bucket LED will be lit when the bucket is full.

To empty your dehumidifier:

· Grasp the bucket sides and slide back to remove the bucket from dehumidifier

· Grasp the handle and bottom of the bucket to lift bucket

· Pour water through opening into a sink or tub

· Snap down the handle and reinstall the bucket

Note: If the Empty Bucket light comes on the dehumidifier will not operate. Empty or adjust bucket.

· Allow at least 12 to 18” (30.5 to 45.7cm) of space on the side of the dehumidifier for models with side louvres, and above the dehumidifier for models with top louvres

· You will need a surface strong enough to support the dehumidifier when its bucket is full of water

· Keep all outside doors, windows and other openings closed when you are operating the dehumidifier. Humid outdoor air will increase the dehumidifier’s workload.

· Install the dehumidifier in an area where the temperature will not fall close to 38°F or 3.3°C. Lower temperatures will cause performance to drop.

·  Do not block the louvres of the unit.

Never operate this dehumidifier in an area that is likely to accumulate standing water. If this condition develops, for your safety disconnect the power supply before stepping into the water.

The grow lights can be used to grow any plant species including indoor houseplants, microgreens, succulents, vegetables, etc.

The number of lights depend on the type and size of the plant along with the growth stage. As a general rule of thumb, during the growing stage it's recommended to have one light per 2-3 plants, while during the flowering stage, it's recommended to have one light per plant.

The duration of light depends on the type and size of the plant along with the growth stage. As a general rule of thumb, it's recommended to keep the lights on for 12-18 hours.

The lights can be placed in dry locations indoors. While the lights are suitable for moist environments, they should be placed where water will not drip onto the lights.

The distance of lights depend on the type and size of the plant along with the growth stage. As a general rule of thumb, it's recommended to place the light about 30 cm above the plant.

The A19/BR30 lights have a life expectancy of 15,000 hours and 1-year limited warranty. The 2' (60 cm) Grow Light has a life expectancy of 25,000 hours and 1-year limited warranty.

The grow lights can be used throughout the plant's full lifecycle.

Yes.

Yes.

Dual Spectrum means that the light has two modes and is capable of providing the necessary spectrum for the growing stage along with the flowering stage.

Dual Spectrum means that the light has two modes and is capable of providing the necessary spectrum for the growing stage along with the flowering stage.

The light modes are Growing and Flowering. The Growing mode produces light focused in the blue spectrum and is used by plants during their growing and vegetative periods. The Flowering mode produces light focused in the red spectrum, which will help encourage flowering and fruiting of your plants.

1. Verify your Wi-Fi network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi network.

2. Install your smart grow light bulb in a light fixture and turn the light fixture ON.

3. If the bulb is flashing, continue to step 4. Otherwise set it to pairing mode by cycling the light ON/OFF about 4-5 times with 1-2 second intervals in between ON and OFF.

4. Make sure Bluetooth® and Locations Services are enabled on your mobile device.

5. In the NOMA iQ™ app, select the (+) symbol on the top right hand corner to add the device.

6. Select the smart grow light bulb and follow the prompts in the app.

1. Verify your Wi-Fi network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi network.

2. Plug your smart grow light into an outlet and turn the light switch ON.

3. If the light is flashing, continue to step 4. Otherwise set it to pairing mode by cycling the switch ON/OFF about 4-5 times with 1-2 second intervals in between ON and OFF.

4. Make sure Bluetooth® and Locations Services are enabled on your mobile device.

5. In the NOMA iQ™ app, select the (+) symbol on the top right hand corner to add the device.

6. Select the smart grow light and follow the prompts in the app.

You can connect up to 7 units together. Maximum length should be 5' (1.5 m) or less.

The A19 bulb has a beam angle of 150 degrees, while the BR30 has a beam angle of 110 degrees. A beam angle of a lamp is the angle at which the light is distributed or emitted. 

Yes, the A19/BR30 bulbs can be used in regular household lamps if they're used for plants.

The colour of the light has an amber/pink look to it.

The light colour temperature is 2200 Kelvins.

A BTU is a British Thermal Unit, and it's a measure of how much energy your air conditioner uses to remove heat from your home in one hour.

Using the NOMA iQ™ app, you can control the Temperature Settings, Fan Speed and Swing of your Portable AC.

Using the NOMA iQ™ app, you can control the Temperature Settings and Fan Speed Settings of your Window AC.

Yes, you can pair multiple ACs to your mobile app. You can create a Group and add your ACs to the Group in order to control multiple ACs at a time.

NOMA iQ™ app allows you to create automated schedules or routines through a feature called Experiences. You can configure Experiences to run your ACs during your desired custom schedules (ex: every weekday from 11:00 p.m. to 7:00 a.m.) with the desired AC settings (Temperature, Fan Speed, etc.).

Yes, you can pair your ACs to Google Assistant and Amazon Alexa and control the ACs using your voice.

To pair your ACs to these Voice Assistants, open the NOMA iQ™ app, click on the Voice Assistants option in the Menu on the top left corner and follow the instructions in the app.

Once paired, you can control your ACs using your voice.

In the event of a power outage, the device will automatically restart to its original state once power is restored.

The highest temperature that can be set is 30°C (86°F), and the lowest temperature that can be set is 16°C (60°F).

The screen displays the room temperature.

No, the air conditioner uses R32 refrigerant.

Please refer to the User Manual for instructions on how to store your portable air conditioner unit.

1. Drain the water completely. See "Draining the Air Conditioner“ in User Manual.

2. Run the air conditioner set to Fan Only for approximately 12 hours to dry the air conditioner.

3. Unplug the air conditioner.

4. Remove the flexible exhaust hose and store with the air conditioner in a clean, dry area. See "Installation Instructions".

5. Remove the window kit and store with the air conditioner in a clean, dry area. See "Installation Instructions".

6. Remove the filter and clean. See "Cleaning the Air Filter".

7. Clean the outside of the air conditioner. See "Cleaning the Outside".

8. Reinstall the filter.

9. Remove the batteries and store the remote control with the air conditioner upright in a clean, dry area. 

Check the filter every 2 weeks to see if it needs cleaning.

Note: Do not operate the air conditioner without a filter in place.

1. Turn off the air conditioner.

2. Open the upper and lower back panels. Grasp the centre of the filter and pull it up and out.

3. Clean the air filter with a vacuum cleaner. If the air filter is very dirty, clean it in warm water with a mild detergent. Do not clean the air filter or use any chemical cleaner in the dishwasher. Thoroughly air dry the filter before replacement to ensure maximum efficiency.

4. Install the air filter back into the air conditioner and close the upper and lower back panels.

SACC stands for Seasonal Adjusted Cooling Capacity and is the standard for portable air conditioners. It is a rating in BTU/hour that represents the weighted average performance of a portable AC in a number of test conditions, some of which may be more extreme than the average use case, which is then adjusted to account for the effect of infiltration air and duct heat transfer.

Previously, portable ACs were rated similarly to other styles of air conditioners using the ASHRAE standard. As there is a difference between stationary and portable units, SACC was introduced to better reflect the energy efficiency of each model. While the SACC BTUs are lower than the previous ASHRAE BTUs, the models remain unchanged.

1. Fan: Only the fan runs without cooling. The fan speed can be adjusted from low, medium and high.

2. Dry: Dries the room to reduce the humidity. The AC automatically selects the temperature and low fan speed.

3. Cool: Cools to reduce the room temperature. The fan speed can be adjusted from low, medium or high.

It is entirely normal for your air conditioning unit to produce a little bit of water during routine functioning. This water is stored in the portable AC’s water tank. If you notice water dripping out of your portable AC, please ensure that the drain plugs are properly sealed/plugged.

1.  Initial Setup

When the device is first plugged in, the display will show “77” indicating that the unit is in pairing mode (if it is not displaying “77”, please go to step 5). In order to pair the device, please enable and give permission for Locations Services and Bluetooth on your mobile device. In the NOMA iQ app, select the “+” symbol in the top right hand corner. Select the device and follow the instructions within the app.

2.  Pre-Connected Network

If any pre-connected WiFi network is found, the device will connect automatically and the device status in the NOMA qi app will be updated.

3.  No Pre-Connected Network

If no pre-connected WiFi network is found, make sure the device is in pairing mode (see step 5). Once connected, the device status in the NOMA iQ app will be updated.

4.  No Network Found

If no WiFi network is found after 5 minutes during the pairing process, the WiFi function will automatically turn off and the display will show the room temperature. The unit can still be used with the control panel or remote control.

5.  Reset WiFi Connection/Pairing Mode

To reset your WiFi connection or to set the device to pairing mode, press the "SWING" button on the remote control 6 times (each press will yield a beep). Wait 2 seconds for the display on the control panel to show "77" indicating that the device is in pairing mode. In order to pair the device, please enable and give permission for Locations Services and Bluetooth on your mobile device. In the NOMA iQ app, select the “+” symbol in the top right hand corner. Select the device and follow the instructions within the app.

6.  No Cloud Connection

If the Cloud is down or WiFi signal drops, the device cannot connect to the cloud; the device status in the NOMA iQ app will show as offline.

7.  Power Cycle or Outage

Once a connection has already been established, in the event of a power outage, the unit will restart once power is restored. If the unit is unplugged, plug the device back in and the device will connect to the pre-connected network. If the device has not been paired, upon power up it will go to Initial Setup (see Step 1).

NOTE: While the device is in pairing mode and the display shows “77”, the control panel display, buttons and LEDs will be inoperative for 5 minutes if unpaired. Please pair the device as mentioned in step 1, or if the device is to be used without smart control, please use the remote to control the device while ensuring it’s pointed at the receiver. After 5 minutes if unpaired, the display will show the room temperature and the device can be controlled by remote control or control panel.

*KEEP REMOTE IN A SECURE LOCATION AS IT’S REQUIRED FOR PAIRING.

It is recommended to store the window air conditioner indoors during the winter.

Check the filter every 2 weeks to see whether it needs cleaning.

NOTE: Do not operate the air conditioner without the filter in place.

1. Turn off the air conditioner.

2. Open the front panel. Grasp the centre of the filter and pull up and out.

3. Use a vacuum cleaner to clean the air filter. If the air filter is very dirty, wash it in warm water with a mild detergent. Do not wash the air filter in the dishwasher or use any chemical cleaners. Air dry the filter completely before replacing to ensure maximum efficiency.

4. Replace the air filter back into the air conditioner, and close the front panel.

Please refer to the User Manual for instructions.

1. Run the air conditioner set to Fan Only for approximately 12 hours to dry the air conditioner.

2. Unplug the air conditioner.

3. Remove all accessories and store with the air conditioner in a clean, dry area. See "Installation Instructions“ in User Manual.

4. Remove the filter and clean. See "Cleaning the Air Filter".

5. Clean the air conditioner. See "Cleaning the Front Panel".

6. Reinstall the filter.

7. Remove the batteries and store the remote control with the air conditioner upright in a clean, dry area. 

The 10,000 and 12,000 BTU units have the same dimensions. The unit’s exterior dimensions are L x W x D 18 7/8 x 21 7/8 x 14 9/16"

(48 x 55.5 x 37 cm). The window dimensions should be at least larger than L x W: 18 7/8 x 21 7/8" (48 x 55.5 cm).

Yes, it's normal for water to be dripping outside.

The filter can be found in the front panel.

The highest temperature that can be set is 30°C (86°F), and the lowest temperature that can be set is 16°C (60°F).

The serial number can be found on a label on the window AC unit. The label is located on the top of the AC unit.

In the event of a power outage, the device will automatically restart to its original state once power is restored.

1. Fan: Only the fan runs without cooling. The fan speed can be adjusted from low, medium and high.

2. Dry: Dries the room to reduce the humidity. The AC automatically selects the temperature and low fan speed.

3. Cool: Cools to reduce the room temperature. The fan speed can be adjusted from low, medium or high.

4. Eco: Eco cools the room while saving energy. This mode slowly runs your AC compressor, which reduces the pressure in the condenser and allows the motor to consume less energy to run the unit.

1.  Initial Setup

When the device is plugged in, the WiFi LED will flash slowly indicating that the unit is in pairing mode. In order to pair the device, please enable and give permission for Locations Services and Bluetooth on your mobile device. In the NOMA iQ app, select the “+” symbol in the top right hand corner. Select the device and follow the instructions within the app.

2.  Pre-Connected Network

If any pre-connected WiFi network is found, the device will connect automatically and the WiFi LED will remain lit.

3.  No Pre-Connected Network

If no pre-connected WiFi network is found, make sure the device is in pairing mode (see step 5). Once connected, the WiFi LED will remain lit.

4.  No Network Found

If no WiFi network is found after 5 minutes during the pairing process, the WiFi function will automatically turn off and the WiFi LED will turn off. The unit can still be used with the control panel or remote control.

5.  Reset WiFi Connection/Pairing Mode

To reset your WiFi connection or to set the device to pairing mode, press and hold the "CONNECT" icon on the control panel until the WiFi LED starts flashing indicating that the device is in pairing mode. In order to pair the device, please enable and give permission for Locations Services and Bluetooth on your mobile device. In the NOMA iQ app, select the “+” symbol in the top right hand corner. Select the device and follow the instructions within the app.

6.  No Cloud Connection

If the Cloud is down or WiFi signal drops, the device cannot connect to the cloud; the WiFi LED will turn off.

7.  Power Cycle or Outage

Once a connection has already been established, in the event of a power outage, the unit will restart once power is restored. If the unit is unplugged, plug the device back in and the device will connect to the pre-connected network. If the device has not been paired, upon power up it will go to Initial Setup (see Step 1).

Please follow the instructions found in the manual to install the garage door opener. 

When the device is plugged in and turned on, press and hold the button on the Wi-Fi dongle/adaptor for 5 seconds until the red LED flashes quickly, indicating that the unit is in pairing mode. To pair the device, please enable and give permission for Locations Services and Bluetooth on your mobile device. In the NOMA iQ™ app, select the “+” symbol in the top right-hand corner. Select the device and follow the instructions within the app.

Yes. To receive timely alerts, please ensure notifications are enabled for the NOMA iQ™ app in your phone settings as well as for the device in the device’s settings within the NOMA iQ™ app.

Experiences are currently not supported for Garage Door Opener in the app. However, you can always use the Automatic Close timer function on the wall console to close the garage door at a desired time. You can also create Experiences for Garage Door Light.

The NOMA iQ™ app currently does not support subscriptions. Please look out for updates in the future as we launch more NOMA iQ™ products.

All NOMA iQ™ products undergo rigorous security testing before launch and come with built-in DataGuard™ protection supported by Firedome. This technology automatically detects, prevents and responds to any cybersecurity issues. For additional security, we recommend the following proactive measures for your smart devices:

1. Set a strong password for your NOMA iQ™ account and enable biometric login (fingerprint or face detection) if available on your mobile device.
2. If you use voice control for your Garage Door Opener, please use a strong Voice PIN that is not easily guessed.
3. Keep your Garage Door Opener connected to Wi-Fi to receive the latest Firmware updates.
4. Keep the NOMA iQ™ app updated to the latest version.
5. Enable notifications for the NOMA iQ™ app and the Garage Door Opener. This will allow you to monitor activities and get alerted when your garage door is opened or closed.

If your Garage Door Opener is connected and the NOMA iQ™ app has internet connectivity, it should be able to control it from anywhere.

Yes. Your NOMA iQ™ Garage Door Opener can be voice controlled using both Amazon Alexa and Google Assistant.

The Garage Door Opener will emit a beeping and flashing alert when closing the garage door with the NOMA iQ™ app. This safety feature alerts anyone near the garage that the door is about to close. This alert cannot be disabled. If the garage door cannot be entirely closed for any reason, such as an obstruction detected or safety beam sensors being blocked, the opener will reverse to the fully open position.

Water Leak Sensor:

Remove the holder from the main body. Twist the top half of the sensor counterclockwise. Once the casing is off, remove the small plastic tab on the battery terminal. The battery will be connected, and the sensor will automatically be in pairing mode.

If not in pairing mode, press and hold the power/reset button for 5 seconds until it flashes slowly. Then release the button and the sensor will enter pairing mode. To pair the device, please enable and give permission for Location Services and Bluetooth on your mobile device. In the NOMA iQ™ app, select the “+” symbol in the top right-hand corner. Select the device and follow the instructions within the app. Please ensure that notifications are turned on in the NOMA iQ™ app in the device settings.

When selecting your mounting location, ensure the surface area is clean. During the mounting process, ensure the metal contacts on the probe are facing downwards. Remove the holder from the main body. Select your location and mount the holder using the included screw and wall anchor or using the adhesive mount. Once installed, insert the main body and plug in the probe. Once the main body has been placed in its intended location, place the probe where a potential leak may occur.

Window/Door Sensor:

When selecting your mounting location, ensure the surface area is clean. During the mounting process, ensure that both the main and secondary sensors are aligned correctly. Use the alignment lines indicated on the main and secondary sensors. The sensors must be placed as close together as possible for them to work optimally. Before final assembly, please ensure you’re receiving notifications with the sensors roughly in place while opening and closing the window/door. Place the included adhesive tape on the back of the main and secondary sensors. Select your location and mount the main and secondary sensors. Once mounted, please ensure the sensor is working as intended. When the window/door is opened or closed, the LED on the sensor will momentarily light up and you should receive a notification on your mobile phone (please ensure notifications are turned on in the NOMA iQ™ app in the device settings).

Water Leak Sensor:

Remove the cover, then press and hold the power/reset button for 5 seconds until it flashes slowly. Then release the button and the sensor will enter pairing mode. To pair the device, please enable and give permission for Location Services and Bluetooth on your mobile device. In the NOMA iQ™ app, select the “+” symbol in the top right-hand corner. Select the device and follow the instructions within the app.

 

Window/Door Sensor:

Remove the front cover from the casing, then press and hold the power/reset button for 5 seconds until it flashes rapidly. To pair the device, please enable and give permission for Location Services and Bluetooth on your mobile device. In the NOMA iQ™ app, select the “+” symbol in the top right-hand corner. Select the device and follow the instructions within the app.

The Window/Door Sensors must be installed indoors and are not water-resistant.

The sensors can be re-linked to the app by following these steps: Press and hold the power/reset button on the sensor for 5 seconds until the red LED starts flashing, indicating that the sensor is in pairing mode. In the NOMA iQ™ app, tap the Add (“+”) button on the top right-hand corner and follow the in-app instructions to re-link your device.

When the probe detects water, the sensor will beep for 2 minutes, and you will get a notification from the NOMA iQ™ app. If the leak is not cleared within this time frame, the sensor will go into sleep mode for about 2 hours to conserve the battery. This cycle will continue until the leak is removed. If the device will be installed outside of audible range, please ensure to connect your sensor to the NOMA iQ™ app to receive notifications/alerts. Please also ensure to activate notifications on your mobile phone.

The Water Leak Sensor uses a CR2 battery, while the Window/Door Sensor uses a CR123A battery.

 

Water Leak Sensor:

Remove the holder from the main body. Twist the top half of the sensor in a counterclockwise rotation. Remove the spent battery and place 1x CR2-3V battery into the battery compartment, correctly observing the polarity indications (+/-). Replace the top half of the sensor by rotating it clockwise.

Window/Door Sensor:

Push the button while holding the main sensor and slide the casing upward. Remove the spent battery and place 1x CR123A-3V battery into the battery compartment, correctly observing the polarity indications (+/-). Replace the battery compartment cover.

We recommend a maximum number of 30 devices paired to the app. Exceeding the recommended limit might affect the performance of your wireless network and the app.

The sensors should be placed as close as possible to each other to function optimally. Please test the sensors in the intended location/position to ensure notifications are being received before fully assembling.

1.     Verify your Wi-Fi network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel.

2.     Install the ceiling fan and power it on from the switch. Ensure that the ceiling fan and light are responding to the remote control.

3.     Press and hold the power and light buttons on the remote simultaneously for 5 seconds, until you hear the fan beep twice.

4.     Once the fan beeps twice, it can be added to the NOMA iQ™ app. Make sure Bluetooth and location services are enabled on your mobile device.

5.     In the NOMA iQ™ app, select the ‘+’ symbol on the top right-hand corner and select 'Add New Device.'

6.     Select the ceiling fan and light and follow the prompts in the app.

For further troubleshooting, please refer to the manual.

1.     Plug in your NOMA iQ™ smart ceiling fan and light into an electrical outlet.

2.     Press and hold the power and light buttons on the remote simultaneously for 5 seconds, until you hear the fan beep twice.

3.     Once the fan beeps twice, it can be added to the NOMA iQ™ app.

Your NOMA iQ™ smart ceiling fan includes a smart ceiling fan light too. The smart light can be controlled by remote, NOMA iQ™ app or by voice.
 

Reversible blades can be assembled in both directions. Each side is white matte and there is no specific orientation that's required during installation.
 

Yes, your ceiling fan's direction can be controlled by voice commands. You can find this guidance in the NOMA iQ™ app as well.

Your ceiling fan's direction can be changed by the respective buttons on the remote, controls in the NOMA iQ™ app, and by using voice assistant commands.

Yes, the LED light kit can be replaced. Please contact customer service for a replacement.
 

Your NOMA iQ™ ceiling fan is intended for indoor use only.
 

Yes, the ceiling fan must be connected with the down rod.
 

The ceiling fan's power, fan speed and fan direction can be controlled by voice assistants. Additionally, your ceiling fan light's power, brightness and white temperature can be controlled by voice assistants. You can find this guidance in the NOMA iQ™ app as well.
 

The smart ceiling fan is indoor-rated only.
 

01. Initial Setup
When the device is plugged in and turned on, press and hold the Wi-Fi button until the Wi-Fi LED starts single-flashing, indicating that the unit is in pairing mode. To pair the device, please enable and give permission for Locations Services and Bluetooth on your mobile device. In the NOMA iQ app, select the “+” symbol in the top right-hand corner and select ‘Add New Device’. Select the device and follow the instructions within the app.

02. Pre-Connected Network
If any pre-connected Wi-Fi network is found, the device will connect automatically, and the Wi-Fi LED will stay lit.

03. No Pre-Connected Network
If no pre-connected Wi-Fi network is found, make sure the device is in pairing mode (see step 5). Once connected, the Wi-Fi LED will remain lit.

04. No Network Found
If no Wi-Fi network is found after 5 minutes during the pairing process, the Wi-Fi function will automatically turn off and the Wi-Fi LED will turn off. The unit can still be used with the control panel.

05. Reset Wi-Fi Connection/Pairing Mode
To reset your Wi-Fi connection or to set the device to pairing mode, press and hold both the Wi-Fi button and the POWER button on the control panel until the Wi-Fi LED starts single-flashing, indicating that the device is in pairing mode. To pair the device, please enable and give permission for Locations Services and Bluetooth on your mobile device. In the NOMA iQ app, select the “+” symbol in the top right-hand corner and select ‘Add New Device’. Select the device and follow the instructions within the app.

06. No Cloud Connection
If the cloud service is down or Wi-Fi signal drops, the Wi-Fi LED will double-flash indicating the device cannot connect to the cloud. Once the connection is restored, the Wi-Fi LED will remain lit.

07. Power Cycle or Outage
Once a connection has already been established, in the event of a power outage, the unit will restart once power is restored and automatically connect to the pre-connected Wi-Fi network. If the unit is unplugged, plug the device back in and the device will connect to the pre-connected network.
 

Yes, the humidifier requires a filter. Visit the Canadian Tire website and look for replacement filter (SKU# 043-7361).
 

Yes, the NOMA iQ app will notify you when the filter needs replacement. Please ensure to turn on notifications in the NOMA iQ app and allow notifications of the app on your mobile phone.
 

It is recommended to use distilled or filtered water to reduce white dust and calcium buildup.
 

To set the humidifier to maximum humidification, set the fan speed to high and the temperature to warm mist. This will allow the mist to dissipate faster creating a more humid environment.
 

Yes, the NOMA iQ app will notify you when the water tank is empty. Please ensure to turn on notifications in the NOMA iQ app and allow notifications of the app on your mobile phone.
 

Yes, the smart humidifier supports control using voice commands. Please link your preferred voice assistant (Google Home or Amazon Alexa) to the NOMA iQ app to enjoy the convenience of controlling the humidifier with voice commands. Look for useful prompts within the app to guide you with using voice commands for device controls.
 

This humidifier is most suitable for rooms up to 520 sq ft.
 

Personal information is collected by NOMA iQ™ products in order to provide you with products or services and offer certain device functionality.  Personal information is also collected to maintain your account, provide you with support services and third-party integrations such as with Amazon Alexa and Google Home.  Please review the Privacy Notice for NOMA iQ™ Products and the Canadian Tire Privacy Charter for additional information.

Certain information we request, such as your postal code, is optional.  If you choose not to provide us with optional information you may not be able to use all device functionality.  You may also be required to permit the sharing of personal information with third parties such as Amazon and Google if you wish to integrate your NOMA iQ™ Product with those services. 

If you delete your NOMA iQ™ account, you will no longer be able to use all features of your NOMA iQ™ Product and your account data will be deleted. The device will still function, but it will no longer connect with the NOMA iQ™ mobile app or other connected devices.

In order to delete the data associated with your account and your NOMA iQ™ Product(s) you will need to delete your account. Follow the instructions for account deletion. Navigate to the ‘Menu’ and click ‘Account,’ then click on ‘Delete Account’ at the very bottom and confirm the request.